Archive for Newsletter

RABS & C-RABS

Published on December 17th, 2009

RABS or C-RABS (Closed RABS) is a type of barrier system for aseptic processing of pharmaceutical products that reduces or ...

GAMP 5

Published on September 1st, 2009

GAMP is the shortcut for Good Automated Manufacturing Practice issued by the International Society of Pharmaceutical Engineering (ISPE). The version ...

GASKETS

Published on September 1st, 2009

Gaskets are one of the fundamental components used to make the  isolator system leacktight. COMECER can provide both dinamic inflatable gasket ...

Emergency

Published on June 10th, 2009

Main difference between a “dust control system” and a “containment isolator” is the System behaviour during an Emergency Situation. A “dust ...

Ergonomics

Published on June 10th, 2009

Is the mock-up study a waste of time??? Check what follows and find out the reply. Material handling during the production process ...

Doors

Published on May 7th, 2009

Doors are elements of critical importance in isolator’s costruction. Since they are required to keep the whole system air-tight, the ...

Differential Pressure

Published on May 7th, 2009

Pressure Control is of utmost importance in Isolation Technology. From this perspective, the isolator system is basically required to solve ...

CIP (Clean-in-Place), WIP (Wash-in-Place) and SIP (Sterilization-in-Place)

Published on April 2nd, 2009

Take the chance to deepen these two different schools of thought:  Clean-in-Place (CIP) and  Wash-in-Place (WIP). Up to the 1950s  ...

The Value of Containment Systems

Published on April 2nd, 2009

A Containment System is a barrier designed to prevent dangerous materials from dispersing in the sourrounding environment. According to the ...

Barrier systems: obstacles to contamination

Published on February 26th, 2009

Barrier is a generic term used to define any physical obstacle to contamination. The Category of PBSs (Protective Barrier Systems) ...

Older »