Isolator for Safe HAPI Transfer and Dispensing

TRANSFER ISOLATOR
The isolator consists of a main chamber and an additional MAL (Material Air Lock) Chamber. The isolator is designed for the secure transfer of HAPI into the appropriate bins.

DISPENSING ISOLATOR
The isolator consists of a left pre-chamber, a main chamber and an exit chamber. The products that have to be dispensed are contained in bins.
The closed bins are brought into the isolator system through the pre-chamber front door and placed on a sliding tray placed between the right pre-chamber and the main chamber.

Other key features:

• Bottom of chamber sloped to facilitate drainage of wash down fluids
• JUMO manometer for the internal pressure control
• Inverter for ventilation fan speed control
• Automatic valves for air flow interception
• Manual butterfly valve
• TRANSFER ISOLATOR
  • Polypropylene glove flanges
  • Nitrile gloves
  • N°1 bag-out tube for bin discharge
  • N°1 270-S alpha flang
• DISPENSING ISOLATOR
  • • Sliding tray
    • Bar grills
    • Bag-out tube
    • Funnel for pouring of material
    • 270-S alpha flange
    • Polypropylene glove flanges
    • Nitrile gloves
    • IP65 Illumination units
    • Shelf for storage of customer supplied tools