Estación de trabajo para la avería de radioisótopos aerotransportados provenientes de la manipulación de líquidos volátiles o sustancias gaseosas.
Hecho completamente de acero inoxidable AISI 304 de 1,5 mm de espesor con acabado Scotch-BriteTM. Diseñado de acuerdo con las normas actuales de Radioprotección. El marco está apoyado sobre pies que pueden se pueden nivelar y ajustar en altura con una base de apoyo poliamídica.
The shielding is made of lead with a thickness of 50 mm and is found in:
The work area is entirely made of AISI 316L stainless steel. All the joints are made using the “arc” welding technique and are cut and polished in an inert gas atmosphere.
The entire structure is thus stiffened by these sheet steel boxes. The worktop has raised borders to retain any leakage of contaminating liquids. A connection hole to the lower technical compartment is available on the worktop. This connection can be used as a passage for the capillary tubes and to discharge waste materials by inserting a special container for waste in the lower technical compartment (perpendicular to it). Furthermore, it can be used as a passage for the radioactive fluids with a connection from the floor by means of a lead duct, with 30 mm thickness (optional, upon customers request).
Connections for the technical gases and electric sockets are available in the work area.
Two precision pressure gauges for the continuous measurement of the filter obstruction (absolute filter and active charcoal filters) and the switch to turn on the internal lights and the controls for the manual valves that open/close the technical gases are located on the front upper part of the hood.