AGT – Automatic Glove Tester

¡Advertencia! El contenido en esta página está disponible solo en los siguientes idiomas: Inglés

Warning! «AGT – Automatic Glove Tester» is no longer available.
It has been replaced with «Speedy Glove »«

Generality

The AGT – Automatic Glove Tester is used to test glove integrity in conformity with the pressure decay method ISO 14644-7 Annex E.5 (test in positive pressure). It is equipped with 1 module to test 4 gloves simultaneously.

Isolator Chamber Leak Test: the AGT performs the leak test of an isolator chamber using a dedicated glove flange cover equipped with a differential pressure transmitter and temperature sensor (included in the standard configuration).

Main Features

• Automatic Glove Tester
• Automatic Leak Tester
• Data Records & Traceability options
• Touch-Screen & user friendly SW
• Integrated oil-free air compressor (Medical Grade)
• Dedicated onboard Vacuum Generator
• Easy Start-up, Transfer & Testing

The system can be equipped with 1 to 3 glove test modules. Each module can test 4 gloves. Therefore the maximum number of gloves simultaneously tested is 12.

How does it work?

• The main unit only needs power supply. Compressed air (medical grade) for glove inflating is supplied by an oil-free compressor on board.
• The operator needs to position a flange cover on top of each flange-glove to be tested and easily secure it trough a push button.
• The AGT (automatic glove tester) is then ready to perform the integrity glove test or the Isolator Chamber leak test.

Glove Integrity Testing: Pressure decay method performance qualification.
Read the white paper.