The ATEX isolator is designed to carry out weighing and powder transfer procedures (API) in complete safety. The ATEX isolator consists of a chamber equipped with connections for scales and cable runs, with a front wall in glass which can be opened completely.
The chamber is also equipped with two spray balls and two spray guns for perfect cleaning.
The transfer and discharge of materials takes place by means of a RTP located on the right side of the chamber and a barrier sack with interlocking door located on the operating surface. Given the large quantity of rejects, the isolator was equipped with an automatic lift trolley which, placed under the barrier sack, allows accumulation of the rejects and therefore easy transport.
The internal work area is classified as ATEX ZONE 22 Ex II3D_/3, therefore a series of upgrades were adopted in the choice of improved solutions to ensure the handling of the highly explosive substances treated there.
The filtration system is composed of a single inlet stage inside the enclosure and a double output stage (one inside and one outside the enclosure). The ventilation system has the following modes based on the type of supply: Laboratory air, Process air and Nitrogen.
Fill in the form below to download the technical data sheet pdf with full details of ATEX Isolator – Isolator with ATEX compliant chamber for dispensing procedure
to download this and other data sheetsLog In
Registration is for professionals that work with containment and Isolation Technologies and grants full access to our product data sheets and cataloguesRegister
News and invitations to events and fairs directly in your mailboxSubscribe