Avertissement ! Le contenu de cette page est disponible uniquement dans les langues suivantes: Anglais - Italien- Russe
It is situated into a bunker of 500 m2 expressly made near to the production factory. It has been equipped with a control room, a storage area for instruments incoming from outside and three irradiation rooms:
1. X ROOM, where the following plants are located:
2. γ ROOM, where the following plants are located:
Besides the a.m. plants, the centre is equipped with the following devices necessary for the calibration of:
Passive dosimeters – The centre is provided with a set of water phantoms (ISO phantoms SLAB, ROD and PILLAR) for the irradiation of passive dosimeters for body and limbs at prefixed doses in terms of Hp (10, a) and Hp (0.07, a), expressly made by COMECER up to the ISO 4037-3 rules.
3. α β γ ROOM, where are calibrated instruments for non Accredia report.
For the surface contamination monitors, the following reference sources are actually available to characterise and calibrate (photon and planar sources 10×10 cm):
RADIONUCLIDE DOSE CALIBRATORS:
A set of 4 reference radioactive solutions in 20 ml vials is also available for the calibration of radionuclide Dose Calibrators in nuclear medicine depts. Solutions actually available: