MIP Series Shielded Cell for Synthesis Modules and Research Activities

The series of shielded housings model MIP has been designed to host automatic modules for routine production or research equipment of radioisotopes and radiopharmaceuticals for experimental use. The series has been designed to guarantee radioprotection to the operator and the utmost decontamination and cleaning procedures effectiveness. The work chamber is sealed, shielded on every side and kept under negative pressure.

The MIP shielded cell is available in two sizes: 1100 mm and 1390 mm (work chamber width).

Used in Radiopharma Production For R&D Radiochemistry and Radiopharma Synthesis Dose Calibration
 
MIP Radiochemistry Prechamber

The cell is shielded on all sides with 75 mm or 100 mm thick lead. Shielded door with lead glass window.
The working area is made of AISI 316L stainless steel with Mirror-Bright surface finishing.
Turbulent flow internal ventilation kept in continuous negative pressure. Perfect door closing is ensured by a system of inflatable gaskets placed around the door’s perimeter.

The MIP cell is equipped with Comecer Drawing System, allowing the extraction of the vial without opening the cell, ensuring safe conditions for the operator.
The cell’s standard equipment also includes a technical lower compartment with electrical sockets, a manual tele-plier for moving the objects from outside, a shielded ion chamber compartment, connected with the working area, where the isotope vials can be calibrated using a pneumatic elevator.

The MIP series enables you to host large sized automatic synthesis modules or complex equipment (such as HPLC). It has suitable shielding for isotopes with very energetic gamma emissions. It is possible to install tele-manipulators and a side autoclave to sterilise the product, which makes this cell ideal for advanced research. The system complies with the cGMP guidelines.

Features and Benefits

  • Right side tele-pliers to handle the vial from the work area to the extraction system and dose calibrator
  • Preparation and installation of two tele-manipulators
  • Preparation and installation of the side autoclave (which can be reached with the tele-manipulator)
  • Dose calibrator compartment equipped with pneumatic elevator
  • Product extraction system in shielded container by means of specific drawer. Extraction occurs by means of an airlock system with an automatic double valve separation
  • Hinged or sliding front door equipped with a large shielded glass. In the case of the hinged door, it is equipped with hand passage doors for hot manipulation
  • Set up for side material passage chamber (side airlock), shielded or non-shielded, with air quality complying with Class B ’’At rest’’ (EEC-cGMP) and equipped with manipulation gloves
  • Set up for side shielded sliding door, which is automatically controlled, between the material introduction chamber and dispensing chamber
  • An inflatable gasket system, placed on the perimeter of the openings, seals the chambers.
  • Air outlet filtration system made with active carbon filtering cartridge.
  • Air inlet filtration system made with HEPA absolute filtering cartridge with 99.995% efficiency.
  • Set-up for the Geiger probes for measurement of the radioactivity present inside the cell
  • Lower technical compartment with electrical sockets and sealed cable entry
  • Set-up for contaminated air containment systems (ACS)
  • Set-up for automatic leak test.

Product highlights

  • Modular design and flexible configuration
  • Available in Pb 75 or 100 mm shielding
  • 7” touch-screen operator panel to check and trace the critical parameters of the machine both in “at rest” or “in operation” mode
  • Working chamber air quality complies with Class B “At rest” (EEC-cGMP)
  • Airtight connections for radioactive fluids
  • Fluid supply lines made of AISI 316L stainless steel with ball shut-off valves
  • DOP test connections (filter leakage test)
  • Product extraction system (Drawing System).

Information request / Pdf download

Fill in the form below to download the technical data sheet pdf with full details of MIP Series – Shielded Cell for Synthesis Modules and Research Activities

Related products

CLIO

Volumetric Dispensing System for Radiopharmaceuticals

Radiopharma Production Filling · Dispensing · Dose Calibration
Learn more

ARGO

Vial Dispensing System

Radiopharma Production Filling · Dispensing · Dose Calibration
Learn more

BBS Series

Shielded Cells for Synthesis Modules

Radiopharma Production R&D Radiochemistry and Radiopharma · Synthesis
Learn more

FEBO SERIES

Syringe Dispensing System

Radiopharma Production Nuclear Medicine Filling · Dispensing · Dose Calibration
Learn more

ACS

Air Compressing Station

Radiopharma Production
Learn more

CF18-T

Tungsten shielded container for vial transport

Radiopharma Production Nuclear Medicine Accessories
Learn more

Subscribe to our Newsletter

News and invitations to events and fairs directly in your mailbox